ABONG David Wooden Gear Wall Clock Kit - 3D Clock Puzzle Model Kit - DIY Wooden Clock Kit

Q: How hard is it to set the time?

It is very easy to set the time. The time hands are friction driven, so you just turn them to the correct time as needed. On another note, I DEFINITELY advise against purchasing or building this clock kit. It is borderline impossible to get it to run corrective after spending hours and hours fine tuning it. There are much better wooden pendulum clock lots out there to choose from that work VERY well when completed. I've built four of them and the Abong David is by FAR the worst kit. Save yourself a ton of aggravation, make another choice.

Q: How long will the clock run? Similar clocks only run 12 hours then have to be rewound. Is this one the same?

Hello, The David Wall Clock (K1021) runs for 36 hours on a wind. I hope that helps, Tru Inertia

Q: How do you wind it, does it have a crank? Or, do you have to remove it from the wall and do it from the back? Can anyone give me a description?

Winding the clock is an operation that requires two hands. One hand to slowly lift up on the weight, one hand to carefully spin the cord's wheel-gear as the weight moves upward. Be very careful that the cord doesn't slip off-track and BEHIND the wheel-gear. If that happens, the clock will run poorly,,, or not at all. Yes,,, daily winding of this clock is chore that can easily go wrong.

Q: How thick, front to back, is this clock when finished ?

Approximately 4”; but I HIGHLY Recommend avoiding this clock kit. See my review under “three stars “. I would recommend a wonderful clock from “Wooden-Gear-Clocks.com” kits, they are fabulous.

3.8/5

Product ID: 255332005

Secure Transaction

12 interest-free installments with tabby

⏳36h run time

🪵100+ parts

⚙️12 bearings

Frequently Bought Together

Abong David Mechanical Clock Kit - 3D Clock Wood Puzzle Model Kit - DIY Wooden Gear Clock - Wall Clock with Pendulum, No Batteries Required, Runs for 36 Hours on Single Wind

ABONG Crossingham Wooden Gear Wall Clock Kit Pendulum Wall Clock Kit Mechanical Wooden Clock Model Wooden Clock Puzzle DIY Wood Clock Vintage Clock Wood Working Gear Clock

Abong Laser-Cut Mechanical Wooden Pendulum Clock - 3D Clock Puzzle Model Kit - DIY Wooden Clock Kit

Description

🕰️ Time to Build Your Legacy!

CRAFT YOUR TIME - Unleash your inner clockmaker with this intricate DIY kit!
NO BATTERIES NEEDED - Eco-conscious design powered by a falling counterweight.
CONVERSATION STARTER - A stunning piece that will captivate guests and spark discussions.
SUSTAINABLE ELEGANCE - Made from eco-friendly birch plywood and poplar hardwood.
FAMILY BONDING EXPERIENCE - Create lasting memories while building together.

The ABONG David Wooden Gear Wall Clock Kit is a DIY model that combines craftsmanship and functionality. With over 100 precision-cut parts, this pendulum clock runs for 36 hours on a single wind, requiring no batteries. Perfect for family bonding, it offers a rewarding challenge and results in a stunning wall clock that serves as both a timepiece and a conversation starter.