iPhone 6S LCD Screen and Digitizer Full Assembly.The new screen were pre-assembled. Including front facing camera, earpiece speaker,Proximity Sensor and the LCD shield plate (WITHOUT Home button). You will not need to transfer these parts from your old display assembly to your new part.Convenient for replacing and installing, Saving time and low risk.Installation Notice: 1. Choose the RIGHT model and color 2. Make sure already disconnect battery cable or power off before installation. It could save your phone from short circuit or incorrect installation damage. 3. Please check the LCD and make sure the flex cable is in good condition and there is no debris on the connector. 4. The flex cable are very sensitive and frangible. DO NOT over-bend or use excessive force to tear it, Handle Carefully ! 5. There are many scres when you replacing the assembly which are different in size and length. Make sure each screw are installed back to its ORIGINAL hole 6. Follow the Operation Guide or video online step by step if you are Beginner(also easy to install)Package including: 1 x lcd touch screen+digitizer assembly1 x High Qulity Repair Tools Set1 x Non-Dust Cloth1 x Sim Card Pin1 x Hardness Tempered Glass 1 x InstructionsTroubleShoot help: If your phone have some problems after installed. For example, cannot turn on, no touch, no home button function, flashing, lines on screen etc., please follow these steps: 1. Reinstall all flex cables from the motherboard and double check all flex cable is in good condition.2. Restart your phone: press home button and power button simultaneously till the phone shut down, after few mins, turn the phone on.
Trustpilot
3 days ago
1 week ago
