🚀 Elevate Your 3D Printing Game!
The Zeberoxyz CR-10 Ender3 3D Printer Direct Drive Plate Upgrade Kit enhances your 3D printing experience by providing a stable and flexible solution for Creality Ender-3 and CR-10 models. Made from high-quality cold rolled sheet materials, this kit includes a direct drive plate, a 60cm motor extension cable, and PTFE tubes, ensuring compatibility with a variety of filaments, including TPU. Installation is a breeze with no firmware modifications required, making it the perfect upgrade for enthusiasts looking to expand their printing capabilities.
Compatible Material | Thermoplastic Polyurethane |
Compatible Devices | Laptop, Smartphone |
Color | Blue |
Item Weight | 68 Grams |
Enclosure Material | Aluminum |
N**Y
Works
Works great, fit properly, no complaints.
A**R
Very pleased
I installed this on my stock ender 3. (Not pro or V2) Everything lined up perfectly. Fan shroud seems to seat properly. Couldn't be happier. I like to tinker and this was a fairly straight forward install. Be sure to properly route your cable bundle how you want it before you attach hotend and shroud to the plate. Hoping a bl touch can mount to this but I haven't decided to go that route yet so I don't know. The short Bowden tube was exactly the right length out of the box to cross the short gap to the hotend and reached the stop point at both ends. I have a single z axis and so far haven't noticed my gantry drooping from the added weight. For the price, this is a very good upgrade. Product arrived on time.
D**K
you're going to need a dual z axis kit
It's too heavy to run on a single axis ender. To counter the weight, you need to have a command to z-hop on every layer or the print becomes lopsided.
M**Y
works fine, check extruder gear set screw tho....
came with a loose set screw on the drive gear, I actually should have checked before using it, but I didn't. a couple turns of an allen wrench and all was good. would not hesitate to buy again..
J**N
Definitely a good addition to the Ender 3
I was debating betweeen getting the 3 wheel model and the 4, but I gotta say, honestly I think that the 4 wheel does make a difference in stability, with the sacrifice of adding some extra weight on the arm. This was offset by the added adition of a second Z motor that I put on at the same time, so your experience may differ if you are using the stock single Z version. You will need to both recalibrate your Z offset if your using an auto levelling device (you pretty much need to do that any time you mess with the extruder anyway to be safe), as well as dialing down your retraction setting to something like 0.8mm. At that retraction, I was getting no detectible stringing at all. Altogether I'm very pleased with this and would definitely reccomend it as an easy, inexpensive way to add direct drive to your setup.
B**N
Good Product, but bad design
This kit seems to be of decent Quality. On par with the Creality parts it replaces, however the designers seem to have overlooked that it would have been better to mount the drive motor on the back side and the drive wheels in the front. I'm not really sure why they thought it would be better for the weight to be bouncing around so far past the rollers. It seems like other companies have made their kits in this fashion and I will probably be replacing this one as soon as possible. There are also no clear instructions on how to set this up. So best of luck for the hobbyist or beginner.On the upside, it seems to be doing ok printing ninjaflex on a slower speed with retractions turned off. The extruder wheel and tensioner don't seem to do any better with soft filament than the stock plastic unit.I would definitely recommend getting a kit that mounts the motor on the backside and skip this one.
B**S
Sunlu s8
Worked on my sunlu s8. Only one fan hole lined up but it's fine with a zip tie on the other side
A**N
Ender 3
What is it easy to set up an install? It does take some time so make sure you go slow. Also, make sure you recalibrate your E steps after
Trustpilot
1 month ago
1 month ago