222-415 | WAGO Lever-Nuts® | Original Lever-Operated Splicing Connector | for Solid and Stranded Conductors | 5-Conductor with Operating levers | 28-12 AWG | Gray housing | [Box of 40 Pieces]

As ordered

In our family (hubby and me) I am the official online procurement officer and #1 assistant and gopher... I finally got to actually "help" install some overhead light fixtures in our new laundry room and hallway (we are building a house).... Holy Moly! These are slick and easy to use. I am handy myself, but hubby normally gets to have the fun of using these type of gadgets. I was so pleased with them, that I asked if we needed more for the rest of the build, yep already ordered. Let's put it this way, using the old method with wire nuts involved mumbling, grumbling and sailor language (yep we were sailors), and at least 15 min per light... with these level nuts, prep the fixture, less than a minute, not one curse, then up the ladder to the overhead, insert the mounting screws into the box, insert the wiring into the level nut slot, and snap! Verify that the wires are secure, and it's all over except I have to clean the fixture globes! Would I recommend these? Oh yeah! Note: Hubby prefers the gray ones over the clear ones. I have no idea why, but after that super smooth mission, who am I to question a good thing?

We bought a house some months back and it needed extensive electrical work. I had completely rewired another house before, so I had a lot of experience with this. I used traditional connectors for most jobs. But I found once I started get to more than two wires together, it was extremely difficult to get all the wires together at once. They frequently came loose. Dead circuits became common.I had two situations where this was being used: One where the circuit was in transition from old wiring to new, and another where it was entirely new wiring. For the first situation, these were absolutely perfect. I can add and remove wires individually without disturbing the others. They fit extremely snug and I haven't had one yet come loose. It's amazingly sturdy. You'd think those little levers would snap right off. Nope. They're in there amazingly tight!My only gripe is that these are fairly sizable, so they take up a significant amount of room in the box. Typically I used them until the wiring it fairly stable, and then swapping it out with a permanent nut becomes very easy. Those nuts take up about half as much room, and still stay snug when moving the wires into place.Well worth getting a box.

These conductors are AMAZING and a real time saver. Not to mention they give you peace of mind. They are well built and designed. The levers snap down on 12-28 AWG very securely. No need to worry about loose connections electric caps working their way off or electrical tape deteriorating causing a potential hazard for your home and family. I have a older home that has went through a couple piecemeal renovations. So even changing out a couple switches and sockets was a to say the least task! The wires were a rats nest, not marked and shoddily taped together by whatever hack the previous owner had do the job. After I figured out what wires went where a connected them with these. It was a breeze! Safe secure and easy, no more twisting wires together taping and putting on caps. Just strip the end snap em in and wire them to where you need it. I truly wish I discovered this product's long ago. It would have saved me a lot of time headaches and worry. All around quality well thought out and constructed product, I find no faults with. Don't hesitate just click buy, save yourself the time effort and peace of mind !

This product was suggested by my father who is an electrician. I had a 3-gang box and needed to provide power for all 3 switches but I didn't want bulky wire nuts getting in the way. It is a pretty fast learning curve to use this connector. Pull up on each of the little finger switches to prepare to insert each wire. Strip just enough wire for half the depth of the wire cavity. Insert the wire until it stops. Press down on the finger to lock into place. A slight tug confirms the connection. The wire can even spin to position it, but it will not come out on its own. By stripping the wire only half the length of the connector cavity, the bare wire is not exposed when inserted. And if you make a mistake, pop up the finger and trade wires. It was fast, secure, and tucked away where I would otherwise have multiple wire nuts in use. I will be buying more of these.

Fast delivery and product was correct.

So convenient. I was working with solid 12 AWG in a tight space with some lesser braided wires for light fixtures. Wire nuts were frustrating and I had to redo many connections from moving the finished connections in the box - which doesn't inspire much confidence for the long haul. I considered soldering or adding smaller gauge jumpers before coming across these. What a game changer. Now I'm certain that I have good connections and I could easily make modifications to my wiring job, regardless of gauge.I bought the big ones because I had limited space in a few boxes with a lot of connections - if I had more space I would have jumpered several of the 3 connectors and saved a little dough. Highly recommended, they maybe take a little more space than an equivalent wire nut but not much. Some boxes took me half the time.

They are expansive but worth it; they save time. No more twisting and taping wires. The tabs for open/close are genius! The tabs are small, so big fingers could find them not so easy to use. The construction is solid. After wires are inserted and closed properly, nothing feels loose. The gauge on the back helps you measure exactly how long the exposed wires should be. For 3 or less connectors, they are about the same size as the twisting wire nuts. For 4 or more connectors, they are smaller. Since the wires do not need to be twisted, they require less wire length as well. This could be very helpful in situations where the wires are just a little too short for comfort with the regular wire nuts.